Vevor HQS-36AY handleiding
Handleiding
Je bekijkt pagina 9 van 104
- 8 -
INSTALLATION INSTRUCTION
Step 1
Ventilator requires a 360 mm x360mm roof opening, if you are replacing
another type already installed, remove the old existing roof vent. Remove
all old roof sealant for a minimum of 2" entirely around the roof opening.
If you are installing a vent in a new location, mark the desired location for
your vent (make sure to stay between roof joists). Then cut a 366mm
x366mm (or other size as necessary) opening through the roof and ceiling.
Place the ventilator into the roof opening and trace a pencil line around it to verify
the clean seal area that will be required. Note that the ventilator must be centered
in the roof opening with the hinge of the lid facing the front to the vehicle.
CAUTION: When installing your ventilator, only use caulking/sealant compatible
with the flange (plastic product and the roof surface. DO NOT use materials
containing solvents such as or similar to xylene, Toluene, Methyl Ethyl Ketone,
Acetate or Acetone as they can damage the flange. Also, polysulfide (Thiokol) type
sealants must be avoided. If in doubt, please contact the manufacturer of your RV
for further information.
Bekijk gratis de handleiding van Vevor HQS-36AY, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | HQS-36AY |
| Categorie | Ventilator |
| Taal | Nederlands |
| Grootte | 15508 MB |
