Vevor HMR1200 handleiding
Handleiding
Je bekijkt pagina 23 van 320
- 22 -
FIG.12 FIG.13
11. OPERATION
The following steps are intended as a basic guide to machine operation,
and are not to be considered a complete guide to concrete finishing. Read
the “Training” section of this manual for more information.
11.1 Maneuvering the Trowel
11.1.1 Get into the operator’s position behind the handle. With a secure
foothold and a rm grasp on the handles slowly increase the engine speed
until the desired blade speed is obtained.
11.1.2 To maneuver the trowel, gently lift up on or press down on the main
trowel handle.
To move the machine to the operator’s left, lift up on the handle, to move
the machine to the right, push down on the handle.
11.1.3 Adjust the blade pitch on the Standard handle, by turn the Pitch
Adjust Wheel clockwise or counter- clockwise.
• To move the trowel to the operator's left, Lift up on the handle, to
move the trowel to the right push down on the handle.
• Remember! that if you let goof the trowel, just step away and let the
trowel come to a complete STOP before trying to recover the trowel.
• The best method for finishing concrete is to slowly walk backwards
with the trowel, guiding the trowel from side to side. This will cover all
footprints on wet concrete.
Bekijk gratis de handleiding van Vevor HMR1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | HMR1200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 59152 MB |
