Vevor EM5500-48L handleiding
Handleiding
Je bekijkt pagina 26 van 352
- 24 -
46
Maximum discharge
current protection
Default OFF
Disable current discharge
current protection function
When the discharge current
exceeds setting value, the
battery will stop discharging.
The setting range is from 50A to
500A.
4. BATTERY EQUALIZATION
Equalization function is added into charge controller. It reverses the buildup of
negative chemical effects like stratification, a condition where acid concentration is
greater at the bottom of the battery than at the top.Equalization also helps to
remove sulfate crystals that might have built up on the plates. If left unchecked,this
condition, called sulfation, will reduce the overall capacity of the battery. Therefore,
it’s recommended to equalize battery periodically.
How to Apply Equalization Function
You must enable battery equalization function in monitoring LCD setting program
33 first. Then, you may apply this function in device by either one of following
methods:
Setting equalization interval in program 37.
Active equalization immediately in program 39.
When to Equalize
In float stage, when the setting equalization interval (battery equalization cycle) is
arrived, or equalization is active immediately, the controller will start to enter
Equalize stage.
Bekijk gratis de handleiding van Vevor EM5500-48L, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | EM5500-48L |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 56647 MB |
