Vevor D1000 handleiding
Handleiding
Je bekijkt pagina 28 van 256
Maintenance and service
If there are any repair service problems, even if not listed above, please
immediately send the tools to the company's authorized repair center or return to
the factory.
When repairing the machine, use the specified parts. Using the unconfirmed parts
will cause damage to the machine or other serious injury accidents.
For any questions about tool use and functionality, please call the company
Technical Services department or visit the www.vevor.com/support website to get
the most recent authorized service center information.
Fault diagnosis
Question
Cause
Solution
Spring knotted or
broken
The spring is exerting too
much force.
Do not use force to operate
the spring, let the dredging
head work normally.
The spring does not match
the size of the pipeline.
1/2 "is suitable for pipes
ranging from 3" to 4 ".
Motor reversal.
Only use the reverse
function when the
unblocking head is trapped
in a blockage.
The spring is corroded by
acidic substances.
Regularly clean and
lubricate the steel cables.
The spring is severely worn.
Replace with a new spring.
The spring is not properly
supported.
Properly support the spring,
refer to the instructions in
the operating manual.
Bekijk gratis de handleiding van Vevor D1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | D1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 37740 MB |
