Vevor D1000 handleiding
Handleiding
Je bekijkt pagina 22 van 256
plum blossom screw on the automatic cable feeding device to the extent that the
spring cannot be pulled out. Use your hand to push the operating handle of the
automatic cable feeding device to the left to the position where it cannot be pushed,
which is the forward gear. Use your hand to push the operating handle to the right
to the position where it cannot be pushed, which is the backward gear; Push the
operating handle of automatic cable feeding device 2 to the left to the position
where it cannot be pushed, which is the reverse gear. Use your hand to push the
operating handle to the right to the position where it cannot be pushed, which is
the forward gear (as shown in the figure).
Automatic device 3 does not have an operating handle. Tighten the plum blossom
screw on the automatic device to the point where the spring cannot be pulled out,
and the machine is in an automatic cable feeding state. By changing the switch
gear, the steel cable can automatically move forward and backward. When the
switch is placed in the CW gear and the foot switch is pressed, the spring will
automatically move forward. If the spring needs to move backward, the switch
needs to be placed in the CCW gear; When the switch is placed in the OFF
position, the machine stops moving; If the plum blossom screw on the automatic
cable feeding device 3 is loosened to the point where the steel cable cannot be
pulled out, the machine is in manual cable feeding mode.
Automatic cable device 1 Automatic cable device 2
Figure-Handle gear (from the front of the machine)
Bekijk gratis de handleiding van Vevor D1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | D1000 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 37740 MB |
