Vevor D-01A-1200 handleiding
Handleiding
Je bekijkt pagina 8 van 96
- 7 -
Tips: Do not press in the middle or the end.
Diagonal Cutting
Put tile on the machine against the adjusted angle ruler.
Place the cutting wheel on the rear edge of the tile.
Slide the wheel forward by pushing the handle down with medium pressure.
Scoring the tile surface glaze as the handle is pushed forward.
It is important to make one continuous motion, scoring the surface only once per
time.
After scoring and without moving the tile position, so that the breaker is slightly in
the front edge of the tile and front stop.
Raise the handle a little and release the breaker so that the breaker is flat on the
tile.
Apply increasing pressure on the handle until the tile snaps along the score line.
Bekijk gratis de handleiding van Vevor D-01A-1200, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | D-01A-1200 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 15684 MB |
