Handleiding
Je bekijkt pagina 10 van 181
- 8 -
· Display Screen Initialization: connect to the power supply,the buzzer
will make a long beep,and the display will be on for two seconds then enter
the normal operating mode.
·Power ON/OFF: press to switch ON/OFF.
·Temperature Setting: press or for temperature setting,the setting
will be saved automatically after stopping operating for three
seconds.Note:the temperature displayed is the current temperature of the
compartment,it'll take a while to reach the set temperature.
Temperature setting range:-20~20℃(-4~68℉)
·Cooling Mode: under the running state,press to switch MAX(fast
cooling)and ECO(Energy saving Mode).(*Factory setting is MAX.)
·Battery Protection Mode: under the running state,long press or three
seconds until screen flashes,then press again to select protection mode
H(High),M(Medium)and L(Low) (*Factory setting is M).
Voltage Reference:
INPUT
MODE
DC 12V
DC 24V
CUT OUT
CUT IN
CUT OUT
CUT IN
L
8.5V
10.9V
21.3V
22.7V
M
10.1V
11.4V
22.3V
23.7V
H
11.1V
12.4V
24.3V
25.7V
*the voltage is theoretical value,there may be a deviation in different
sceneries.
*H should be set when the product is connected to car power,and M or L
Bekijk gratis de handleiding van Vevor CX50, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | CX50 |
| Categorie | Koelkast |
| Taal | Nederlands |
| Grootte | 18969 MB |
