Vevor B2E handleiding
Handleiding
Je bekijkt pagina 14 van 192
- 13 -
4. Motor Wiring
4.1 Firstly, install the wire control switch in a suitable position inside the
vehicle (Figure D20). After the canopy is installed, introduce the motor wire
into the vehicle and connect it according to Figure D21. It is recommended
to use a 2-core power cord with RVV2 * 1.5mm or more and a wire length
of no more than 3m for the motor power cord (the wiring part inside the car
needs to be prepared).
Figure D20 Figure D21
4.2 After confirming that the wiring is correct, power on and press the line
control switch to test the opening and closing of the sunshade. If the
direction of the button does not match the direction of the opening and
closing action, please switch the positive and negative poles of the wiring
to adjust the direction of motor rotation (Figure D22).
5. Motor stroke adjustment
If the stroke of the sunshade retractable motor is too large or too small, you
can open the decorative cap on the side cover of the scroll motor and use a
hex wrench to adjust the stroke adjustment hole A/B to increase or
decrease the stroke (Figure D23).
Bekijk gratis de handleiding van Vevor B2E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | B2E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 28512 MB |
