Vevor APD30 handleiding
Handleiding
Je bekijkt pagina 6 van 104
- 5 -
3.2 Functional test
After having plugged the feeding cable in the electric net , the machine is
ready for the functional test. To start:press the green button , the machine
starts working. To stop:press the red button , the machine will stop
working.Start the machine without loading , let it run for one minute and
make sure it is functioning perfectly.
3.3 Before every work-cycle , always make sure the machine is perfectly
clean , in particular those surfaces that get in touch with the dough. If
necessary clean the machine.
Warning:Take sundries and hands away from the rollers before turn on the
machine!
3.4 Operation for the shaping of round disks
3.4. 1 After turning on the machine , you can put the small dough(20-500g)
which have ferment previously (at least 4 to 6 hours) , squash the sides
slightly and put some dry flouron it so it can easily go through the upper
rollers. (Pict.1)
3.4.2 When the dough comes out from the upper roller , you will see thin
dough,with an oval
shape.You can turn the dough to 90°place by hand rapidly , and ready for
the next trial to through the lowest rollers.Out of these rollers it will have a
disk shape , this shape is not perfect so it needs the finishing touches by
hand. Pict.2
3.5 Usage for the shaping of rectangles , squares , and others.
The methods are the same as the point 2.4 . If you want to obtain different
shaping dough , you can cut the dough to the approximate shape , for
Bekijk gratis de handleiding van Vevor APD30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | APD30 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 14430 MB |
