Vevor ACDC TIG-225 handleiding
Handleiding
Je bekijkt pagina 17 van 176
MANUAL WELDING
DEBUGGING AND OPERATION
ARGON ARC WELDING
DEBUGGING AND OPERATION
1. Power on and turn on the power switch.
2. Connect the argon arc welding gun to the
gas-electric interface of the welding machine and
tighten it clockwise.
3. Insert the two-core plug of the torch into the
switch port of the torch.
4. Connect the ground clamp quick connector to
the positive output end of the welder and hold
the workpiece with the ground clamp.
5. Press the welding mode button to switch to
argon arc welding mode.
6. Connect the gas cylinder gas pipe to the argon
arc welding gas port on the rear panel and tighten
it with the throat band.
7. Turn the cylinder valve to reach the appropriate
welding pressure.
8. According to the thickness of the plate, turn the
current adjustment knob to achieve the appropri-
ate welding current.
9. Touch the tungsten electrode of the welding
torch to the workpiece, press the gun switch on
the handle, and welding begins
1. Connect the power plug and turn on the
power switch.
2. Connect the welding pliers to the
positive output port, and connect the
ground clamp to the negative output port.
3. Hold the workpiece with a ground
clamp.
4. Press the welding mode button to switch
to manual welding mode.
5. Adjust the current knob to adjust the
current to the appropriate range.
6. Touch the electrode and the workpiece
with the welding pliers, and start the arc
welding
16
Bekijk gratis de handleiding van Vevor ACDC TIG-225, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | ACDC TIG-225 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 42436 MB |
