Vevor ACDC TIG-225 handleiding
Handleiding
Je bekijkt pagina 11 van 176
▪
10
Welding type indication, power status indication.
▪ Current, plate thickness display.
▪ Button 1: Corresponding to the interface return icon, press to return to the welding type
selection interface.
▪ Encoder: Rotate the adjustment current (automatically match the plate thickness), press
the encoder and rotate to select the operation mode, spot welding time, interval time,
pedal switch, select the required adjustment parameters and press again to pop up the
adjustment window, rotate the encoder to adjust parameters, and finally press to confirm
and exit the pop-up window (you can press the button at any time during the adjustment
process 1 Exit the current parameter setting; If you do not perform any operation during
parameter adjustment, it will automatically return to the current adjustment state after
5 seconds.
▪ Button 2: Enter the complex setting interface, enter the back button 2 to select
parameters, the encoder to adjust the value, press 1 to return to the upper interface.
DC TIG, AC TIG, DC PULSE, AC PULSE OPERATION PAGE DESCRIPTION
Bekijk gratis de handleiding van Vevor ACDC TIG-225, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | ACDC TIG-225 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 42436 MB |
