Vevor 9JYZ-1 handleiding
Handleiding
Je bekijkt pagina 16 van 173
14
good for the growth of cows to improve the output.
(2) When milking by hand, because the strength and rhythm of the milker are not
unified, and he only can milk two teats at 1 time, the cow will not feel satisfied, and
it will influence the normal growth of the cow, then the output of milk will reduce.
Cleaning method:
After finishing the milking, you must start to clean. If you don’t clean the milking
equipment at once, the bacilli will propagate quickly.
The cleaning order (daily cleaning):
1. Clean the claw, milk pipe, and milk barrel with water.
2. Cleaning preparation: Use a big pot with full water, put and claw in the pot, turn
on the vacuum pump, and absorb the water into the milk barrel from the claw.
Turn off the vacuum switch of the vacuum tank, open the cover of the milk barrel,
then pour the water.
3. Circulation cleaning of cleaning agent: Pour the cleaning agent with the correct
thickness to about 70℃ water and homogenize, put the claw in the pot, and open
the vacuum switch to absorb the hot cleaning agent into the milk barrel. After
absorption, pour the cleaning agent back into the pot, then circulate the
absorption until the temperature falls to 40℃.
4. Clean with normal temperature water 2-3 times, absorb the water from the claw
into the milk barrel, and clean the cleaning agent in the equipment.
5. Pour the water, dry it, and put the milking equipment in a clean and airless
place for the next use.
6. Normally, the alkalescence and acidity cleaning agents are used circularly.
3-day alkalescence, then 1-day acidity cleaning agent.
Bekijk gratis de handleiding van Vevor 9JYZ-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 9JYZ-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 31836 MB |
