Vevor 99ES handleiding
Handleiding
Je bekijkt pagina 11 van 176
- 10 -
Connection of negative wire
1.Place the wire on
the sheet metal
section that needs
to be repaired, as
close towelding
area as possible.
2. the welding torch in the
vicinity of the machine near the
automatic welding machine.
3.Fixed ground
Negative electrode connection, time can be set 0.06, power setting 85 or more. First
use can be soldered several times to dissolve the plating on the negative electrode
3.Method of operation
a.Gasket welding
The negative line fixed to the
polished clean and remove the paint
on the workpiece, the closer the
operating surface the better .
Connect the gasket
connector to the torch
and lock it with a gasket.
Bekijk gratis de handleiding van Vevor 99ES, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 99ES |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 23586 MB |
