Vevor 98ES handleiding
Handleiding
Je bekijkt pagina 8 van 96
- 7 -
:Cursor move Kin, the cursor selects the status to display as a transparent
character on a black background, such as: T: 0.01S
: The value is increased or decreased by pressing the key, utilizing
the Ken Move the cursor to the parameter you want to set through
the Just increase or decrease the value.
: Auto Weld Manual Weld Toggle, AT for Auto Weld, MT for Manual Weld.
: Fault indicator.
manipulate
Automatic arc starting:
The machine can weld manually/automatically, the main machine automatically
detects the short circuit of the welding torch and produces a weld joint within one
second. Disconnecting the torch head and the welding part for half a second can
weld the next point, and weld other points in turn. When the switch is switched to
manual mode, the welding is controlled by the gun switch.
How to use:
Follow the steps below:
Connect as close as possible to the area to be welded.
Do not connect to different parts of the body. (e.g. do not connect him to the hood
when working on the door) Make sure that the connection metal is properly ground
smooth.
Polishing the area to be worked on
Attach the tool to be used to the torch and tighten the nut.
Select the tool and power.
Tool and metal contact (automatic mode) or press the gun switch (manual
mode)
The welding arc is generated
WARNING: For best results, it is recommended to use the original wiring cable and
welding torch!
Main unit overheating protection system
The product is equipped with an automatic overheating protection system, which
allows the machine to stop automatically for a few minutes in case of overuse, in
Bekijk gratis de handleiding van Vevor 98ES, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 98ES |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 9237 MB |
