Vevor 90E handleiding
Handleiding
Je bekijkt pagina 16 van 160
- 15 -
Adjust the appropriate
power.
The carcass is heated in a
clockwise direction.
With cold water or wet cloth placed
just to the location of the use of
thermal expansion and contraction of
the prominent part of the tightening,
to return to normal.
Note:
1. before doing this operation, please try the other parts in order to avoid the
current is too large or too long to damage the body to repair the surface.
2. according to the body plate thickness, select the appropriate gear, the machine
will automatically match the welding time with the current.
3. after doing this operation, you can continue to other functional operation, if you
do not continue to work, please turn off the power and cut off the main switch, the
various accessories finishing for the next use.
d.wave line welding
The negative line fixed to the
polished clean and remove the
paint on the workpiece, the
closer the operating surface the
better .
Connect the
connected triangular
pull hammer to the
torch and lock it.
Select the appropriate
welding mode.
Bekijk gratis de handleiding van Vevor 90E, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 90E |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 17767 MB |
