Vevor 45ft*7/8 handleiding
Handleiding
Je bekijkt pagina 6 van 64
- 5 -
However, if the drain is in poor condition or has not been properly designed, the
drain cleaning work may damage the drain. If possible, visually inspect the drain’s
quality before operation.
If needed, place protective covers over the work area floor. Cleaning the
clogged drain can be a messy operation.
Make sure that the Drain Cleaner handle is locked into the upright position for
transport. If the Drain Cleaner needs to be lifted, use proper lifting techniques or
seek assistance if needed. Use caution when moving equipment up and down
stairs. Wear appropriate footwear to help prevent slipping on floor.
Set the Drain Cleaner so that the drum opening is within 2 feet of the drain
access. The greater the distance from the drain access, the higher the risk of the
cable twisting or kinking.
If the machine cannot be placed with the drum opening within 2′of the drain
access, use appropriate-sized pipes and fittings to extend the drain access back
to within 2′ of the drum opening. Improper cable support can allow the cable to
kink and twist and can damage the cable or injure the operator.
If needed, set up barriers to keep bystanders away from the Drain Cleaner and
work area during operation.
Select proper cutting tool. (See Cutting Tool Accessories ).
Install the tool to the end of the cable. Slide the base of the Cutter Tool into
the slot at the end of the cable. Fasten together using a screwdriver.
Position the Foot Switch for easy accessibility. You must be able to hold and
control the cable, control the Foot Switch, and reach the Rotation Switch.
4. CORRECTIVE ACTION IN CASE OF FAILURE
1) The operating switch is switched on, but the motor is not working.
-- Wires in the mains plug or in the socket are loose.
Have socket and plug checked or repaired.
-- The switch is faulty.
Have the switch replaced.
2) The operating switch is switched on, but unusual noises can be heard, the
motor is not working or only very slowly.
-- Switch contact has failed.
Have the switch replaced.
-- Component jammed.
Have the electric tool checked or repaired.
-- Too much thrust, as a result the motor is dragging.
Use less thrust during the task.
3) Motor gets hot.
-- Foreign substances have got inside the motor.
Bekijk gratis de handleiding van Vevor 45ft*7/8, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 45ft*7/8 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8182 MB |
