Vevor 28104-1 handleiding
Handleiding
Je bekijkt pagina 5 van 288
- 3 -
5. STORE IDLE TOOLS. When not in use, tools should be
stored in a secure, dry place – out of reach of children.
6. DON’T FORCE TOOL. It will do the job better and safer at the rate
for which it was intended.
7. USE RIGHT TOOL. Don’t force small tool or attachment to do the
job of a heavy duty tool. Don’t use tool for purpose not intended –
for example – do not use a circular saw for cutting tree limbs or
logs.
8. DRESS PROPERLY. Do not wear loose clothing or jewelry.
Loose clothing, draw strings and jewelry can be caught in moving
parts. Rubber gloves and non-skid footwear are recommended
when working outdoors. Wear protective hair covering to contain
long hair.
9. USE ANSI Z87.1 SAFETY GLASSES. Wear safety glasses or
goggles while operating power tools. Also face or dust mask if
operation creates dust. All persons in the area where power tools
are being operated should also wear safety glasses and face or
dust mask.
10. DON’T ABUSE CORD. Never carry tool by cord or yank it to
disconnect from receptacle. Keep cord from heat, oil, and sharp
edges. Have damaged or worn power cord and strain reliever
replaced immediately. DO NOT ATTEMPT TO REPAIR POWER
CORD.
11. SECURE WORK. Use clamps or a vise to hold work. It’s safer than
using your hand and it frees both hands to operate tool.
12. DON’T OVERREACH. Keep proper footing and balance at all times.
13. MAINTAIN TOOLS WITH CARE. Keep tools sharp and clean
for better and safer performance. Follow instructions for
lubricating and changing accessories. Inspect tool cords
periodically and if damaged, have repaired by authorized service
facility. Inspect extension cords periodically and replace if
damaged. Have all worn, broken or lost parts replaced
immediately. Keep handles dry, clean and free from oil and grease.
14. DISCONNECT TOOLS when not in use, before servicing, and when
changing accessories such as blades, bits, cutters, etc.
15. REMOVE ADJUSTING KEYS AND WRENCHES. Form habit
of checking to see that keys and adjusting wrenches are
removed from the tool before turning it on.
Bekijk gratis de handleiding van Vevor 28104-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vevor |
| Model | 28104-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 74655 MB |
