Vestil WP-4848-DD handleiding
Handleiding
Je bekijkt pagina 9 van 17
Table of Contents Rev. 4/12/2024 WP, MANUAL
Table of Contents Copyright 2023 Vestil Manufacturing Co. Page 9 of 17
MOUNTING THE PLATFORM ON YOUR FORK TRUCK
Each work platform has 2 mechanisms for securing it to a fork lift: 1) A tine lock; and 2) A nylon safety strap. Both
safety features must be applied every time the platform is used.
Step 1: Mount the platform on your fork truck. Remove the tine retaining pins (SP-series and WP-3737-FD; see FIG.
5B) or put tine lock in unlocked position (WP-series; see FIG. 5A). Drive forward and insert the forks into the fork
channels/pockets on the underside of the platform. For WP-model platforms drive forward until the tines extend
through both the rear and front fork pockets. See Diagrams in FIG. 5A. Apply the tine lock(s) as shown in FIG. 5A
(WP-model platforms excluding WP-3737-FD) or FIG. 5B (SP-series platforms and WP-3737-FD).
NOTE: Both the safety strap and the tine lock(s) must be used every time the work platform is used.
Instructions for applying the safety strap are provided in Step 2 on p. 10.
WP-3737-FD tine locks
Cotter
pin
Forklift
tine
Mast
guard
SP-175 tine locks
Tine lock
retaining pins
Bekijk gratis de handleiding van Vestil WP-4848-DD, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | WP-4848-DD |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8273 MB |
