Vestil WP-3636 handleiding
Handleiding
Je bekijkt pagina 9 van 17
Table of Contents Rev. 4/3/2020 WP, MANUAL
Table of Contents Copyright 2020 Vestil Manufacturing Co. Page 9 of 17
MOUNTING THE PLATFORM ON YOUR FORK TRUCK
Each work platform has 2 mechanisms for securing it to a fork lift: 1) A tine lock; and 2) A nylon safety strap. Both
safety features must be applied every time the platform is used.
Step 1: Mount the platform on your fork truck. Remove the tine retaining pins (SP-series and WP-3737-FD; see FIG.
5B) or put tine lock in unlocked position (WP-
series; see FIG. 5A). Drive forward and insert the forks into the fork
channels/pockets on the underside of the platform. For WP-model platform
s drive forward until the tines extend
through both the rear and front fork pockets. See Diagrams in FIG. 5A.
Apply the tine lock(s) as shown in FIG. 5A
(WP-model platforms excluding WP-3737-FD) or FIG. 5B (SP-series platforms and WP-3737-FD).
NOTE: Both the safety strap and the tine lock(s) must be used every time the work platform is used.
Instructions for applying the safety strap are provided in Step 2 on p. 10.
WP-3737-FD tine locks
Cotter
pin
Forklift
tine
Mast
guard
SP-175 tine locks
Tine lock
retaining pins
Bekijk gratis de handleiding van Vestil WP-3636, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | WP-3636 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8118 MB |
