Vestil WL-100-5-78 handleiding
Handleiding
Je bekijkt pagina 3 van 30
Operator’s Manual Rev. 6/11/25 WL-100 MANUAL 06-25.DOCX
Table of Contents Copyright 2023, Vestil Manufacturing Corp. Page 3 of 30
ALWAYS use care to center and distribute loads evenly on the platform.
DO NOT attempt to lift an overhanging or cantilever load.
ALWAYS engage parking brakes or wheel locks on equipment before operating the Lift.
DO watch the load for shifting when the Lift is in operation.
ALWAYS keep clear of the Lift while it is moving.
DO NOT place hands or feet under the platform. DO NOT put any body part in the scissor mechanism.
DO NOT store objects under the platform.
DO NOT use the Lift if any damage is observed, or unusual noises heard.
DO NOT operate a Lift with its perimeter toe guard removed, disabled, or inoperable.
ALWAYS place the safety chains across the both ends of the platform before operating the Lift. ALWAYS keep
the chains in place if a falling hazard exists.
ALWAYS raise both bridge segments before operating the Lift.
DO NOT board an elevated platform from the ground. DO NOT step from an elevated platform to ground level.
Do not exceed a travel rate of two feet per second when moving across the platform.
DO ensure that all information, safety, and warning labels remain in place and are legible. See the Labeling
diagram on p. 29.
ALWAYS remove any load from the platform before servicing the Lift or its hydraulic power unit. DO completely
lower the platform, or use the attached maintenance prop bars to support the platform, before servicing this
product.
If additional oil is needed, DO use anti-wear hydraulic oil with a viscosity grade of 150 SUS at 100°F (ISO 32 cSt
@ 40°C) or Dexron non-synthetic transmission fluid. DO NOT use brake fluid or jack oils in the hydraulic system.
Maintenance and repairs are to be done only by personnel qualified to perform the required work.
Consideration will not be given for warranty repair charges without prior written authorization by the
manufacturer.
DO NOT perform any modifications to the lift table without the manufacturer’s written approval. Failure to
receive authorization for changes to the equipment automatically voids the warranty, and may make the Lift
unsafe for use.
Proper use and maintenance are essential for this product to function properly.
Always use this product in accordance with the instructions in this manual.
Periodically lubricate pivot points with bearing grease.
Use only factory-approved replacement parts. Contact Vestil Manufacturing to order replacement or spare
parts.
Contact the manufacturer for SDS (Safety Data Sheet) information.
Bekijk gratis de handleiding van Vestil WL-100-5-78, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | WL-100-5-78 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 8817 MB |
