Vestil VWS-770-AA-DC handleiding
Handleiding
Je bekijkt pagina 6 van 10
UStep 1
U Adjust the legs to provide the desired wheel base. Lock the caster. Lossen the 3
hex head bolts on each side of the frame and s
lide the legs in the desired position.
UStep 2
Always maneuver the VWS from the “Operator’s Position” using the Normal Maneuvering Stance shown
below
a. Grasp the operator
handle at each end. This
will provide the greatest
degree of steering control.
Push/pull maneuver
b. Walk behind the lifter and
keep your feet clear of the
castors
UStep 3
Move the lifter to a position near the intended load and lock the locking caster.
Locking Caster
Step 4U
Move the load to the desired location.
After you arrive at the unloading
destination:
Lock the castor;
Remove the load.
Lower the forks until they are
a few inches above the legs.
Turn the winch clockwise
until the load is positioned
at a comfortable height;
UStep 5
U: Return the lifter to its storage location. Engage the brakes, fold the winch handle, fully
lower the forks, and set the handle latch
pin to lock the winch handle
VWS, Manual
Page 6 of 10
Copyright 201
6 Vestil Manufacturing Corp.
Bekijk gratis de handleiding van Vestil VWS-770-AA-DC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | VWS-770-AA-DC |
| Categorie | Vorkheftruck |
| Taal | Nederlands |
| Grootte | 3225 MB |
