Vestil ULTT-3648-6-YEL230-1 handleiding
Handleiding
Je bekijkt pagina 3 van 12
3
OPERATION INSTRUCTIONS
•
Consult
ANSI MH29.2 - 2000, Safety Requirements for Industrial Tilters, Section 12,
for the owner’s / user’s
responsibilities regarding the operation, care, and maintenance of this machine.
•
Ensure that all employees involved in the operation of this machine understand and follow these instructions!
The standard model ULTT is suitable for use indoors in most industrial locations and many commercial locations. It is
intended to be used to lift and tilt stable, non-hazardous loads and containers having a size or footprint approximately the
same size as the platform.
Loading:
The load rating, in pounds, is shown on the machine dataplate located on the right front corner of the loading (opposite the
backstop) side of the platform . It indicates the net capacity of the machine, with a static load that is centered and evenly
distributed on the platform and having a vertical center of gravity not more than 20" above the platform surface.
For applications involving side loading or loads with higher centers of gravity, consult the manufacturer.
The standard design ULTT is intended to be loaded with a fork truck or similar material handling equipment.
Always center the load, and place it up against the back cradle of the platform to prevent sudden load shifting when the
platform is tilted.
Do not exceed a rate of two feet per second when moving loads onto the platform.
Note:
The addition of any ancillary equipment to the platform by third parties must be taken into account when determining
the maximum working load to be placed on the platform.
Warning:
Do not exceed the ULTT’s load ratings. Injury to personnel or permanent damage to the structure could result
from exceeding the listed capacity.
Operation:
Warning:
Keep all personnel clear of the machine when it is in operation. Be certain no part of any person or object is under
any part of the platform before lowering the unit.
Caution:
Always carefully watch the container and any load in it when it is in operation.
• To raise / tilt the platform back toward the operator, press the “UP” pushbutton.
• To lower the platform toward the floor, press the “DN” pushbutton.
• When a pushbutton is not being pressed, the unit will hold its position wherever it is in its travel range.
Ensure that all safety and warning labels stay in place and are legible. Refer to the labels page in this manual.
Bekijk gratis de handleiding van Vestil ULTT-3648-6-YEL230-1, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | ULTT-3648-6-YEL230-1 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2373 MB |
