Vestil SWA-60-AW handleiding
Handleiding
Je bekijkt pagina 19 van 88
F:\Manual\SM-1517R-110V-100514 14.05.2010.
- 16 -
5-2 Wrapping Function Control
『Turntable Start』:
Starts the turntable rotation, m otor w ill stop autom atically when wrapping is
completed.
『Film-Seat Pause Button』:
When wrapping a particular section of the package that needs extra overlapping
of film to give strength, press and hold th is button f or the f ilm-seat to pause at
the desired section of overlapping. W hen the operator is satisfied with the
amount of overlapping, release this button and the film -seat will continue its
ascending/descending.
『Turntable and Film-seat Zero-return Button』:
This button has two functions:
1: It can be used to determine the height of package in case of m alfunctioning
of the electronic eye. W hen electronic eye malfunctions, the film -seat can not
sense the height of the package and w ill continue to ascend, in which case by
pressing this button the film-seat will cease ascending and start counting number
of upper layer wrapping cycles. Also press this button if the film wrapping
reaches a particular height of the pack age and further m ore wrapping above is
not desired.
2: If the emergency button is activated during wrapping, the turntable and the
film-seat will not be stopped at the star ting position. Therefore in order for both
the turntable and the film -seat to retu rn to their starting position, press this
b
utton once f or turntable to return to starting position and press again for
film-seat to return to starting position.
『Standard Wrapping』:
Film starts wrapping from the bottom of the package to the top, and once from
top back to bottom。
『Single Layer Wrapping』:
Film wraps once from bottom to top and stops when turntable com es to a halt.
Film set then automatically descends down to starting point.
『Water Proof Wrapping』:
Film wraps from bottom to top and then comes to a halt at
approximately 10cm~15cm below the top of the package, then a sheet of water
proofing film or plastic should be m anually placed on top of the package. Press
the Turntable Start button once m ore to restart the wrapping process, at which
the film will start wrapping from top back to bottom.
Bekijk gratis de handleiding van Vestil SWA-60-AW, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | SWA-60-AW |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 28666 MB |
