Vestil STAND-G-V handleiding
Handleiding
Je bekijkt pagina 2 van 9
Table of Contents 8/11/2023 STAND-G, MANUAL
Table of Contents Vestil Manufacturing Co. 2023 Page 2 of 9
SIGNAL WORDS
SIGNAL WORDS appear in this manual to draw the reader’s attention to important safety-
related messages. The following are signal words used in this manual and their definitions.
SAFETY INSTRUCTIONS
Vestil strives to identify foreseeable hazards associated with the use of its products, but no
manual can address every conceivable risk. Minimize the likelihood of injury by avoiding the
hazards identified below and by inspecting and maintaining the product as instructed in the
INSPECTIONS and MAINTENANCE sections of this manual on p. 6-7.
WARNING
Risks of serious personal injuries or death.
Read and understand the entire manual before assembling, using or servicing the product.
Read the manual to refresh your understanding of proper use, inspection, and maintenance
procedures whenever necessary.
DO NOT exceed the capacity of your unit. See LABELING DIAGRAM, label 1153, on p. 8.
Inspect the stand before each use as described in INSPECTIONS on p. 7. Confirm that all parts
are structurally sound and in satisfactory condition. See RECORD OF SATISFACTORY CONDITION
on p. 7.
DO NOT cover or remove any label. Verify the location and legibility of all labels. Label
placement is shown in the LABELING DIAGRAM on p. 8. DO NOT use this device UNLESS all
product labels are readable and undamaged.
DO NOT climb on, sit on, or stand on the STAND-G.
ONLY use this product on firm, level, even ground capable of supporting at least the
combined weight of the STAND-G and a full capacity load.
ONLY use this product to support construction/fabrication materials. DO NOT use this STAND to
support persons. For example, this STAND-G must not be used to hold boards, planks, etc.
supporting people.
DO NOT modify the STAND-G in any way UNLESS you first obtain written approval from Vestil.
Unauthorized modifications automatically void the LIMITED WARRANTY (see p. 9) and might
make the product unsafe to use.
DANGER
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme situations.
WARNING
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
CAUTION
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
NOTICE
Identifies practices likely to result in product/property damage, such as
operation that might damage the product.
Bekijk gratis de handleiding van Vestil STAND-G-V, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | STAND-G-V |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4926 MB |
