Vestil SSLP-200-2 handleiding
Handleiding
Je bekijkt pagina 3 van 7
Table of Contents
Rev. 7/23/2020.
SSLP-200-2 MANUAL
Table of Contents
Copyright 2020 Vestil Manufacturing Co.
Page 3 of 7
NATIONAL STANDARDS
This product is a “Below-the-Hook Lifting Device” (BTH lifter). ASME standard B30.20 (the “Standard”)
applies to BTH lifters. Acquire a copy of the latest version of the Standard before putting the lifter into
service. Follow all use and maintenance/care instructions provided in the Standard as well as all other
provisions written for owners and users. If content in this manual conflicts with a recommendation or
mandatory provision in the Standard, apply the provision from the Standard. Vestil encourages you to
immediately contact
TECHNICAL SERVICE if you discover any conflicts.
RECORD OF SATISFACTORY CONDITION
Record the condition of the lifter before putting it into service. Measure the length and width of the
shackles (08-145-059-A & 08-145-006-001). Include a width measurement of the mouth of each shackle,
i.e. the area that receives the shackle pin. Record your measurements. Thoroughly photograph the unit
from multiple angles. Include close range photos of each label and shackle. Collate all photographs and
writings into a single file. Mark the file appropriately to identify it. The file provides a record of the lifter in
satisfactory condition. Compare the results of all inspections (see p. 5) to this RECORD to determine
whether the unit is in satisfactory condition. If the lifter is not in satisfactory condition, repair it before
returning it to service. Purely cosmetic changes, like damaged paint/powdercoat, do not constitute
changes from satisfactory condition. However,
touchup paint should be applied to all affected areas as
soon as cosmetic damage occurs to prevent
rusting and corrosion. If left unaddressed,
rusting/corrosion will alter the lifter from satisfactory condition and could make it unsafe to use.
SPECIFICATIONS
Dimensions, net weight, and capacity information for SSLP lifters are provided below. This information is
also available online to anyone who visits the Vestil website.
Navigate to the webpage for model the SSLP
lifter by entering the model number into the search field on the home page. Once on the product webpage,
scroll the page to the “Product Specifications Table”. Click the button in the “PDF’s” column that looks like a
pencil inside a blue-bordered box. A PDF file will open. This file is the specifications document. Print a copy
of the document as soon as your product is delivered and keep it
with your copy of this manual. If you
encounter difficulties while trying to obtain a copy of the specifications document, or if you notice any
differences between the document from the website and the information presented below, contact
TECHNICAL SERVICE. Contact information is provided on the cover page of this manual.
SSLP-200-2
08-007-458
STANDARD FEATURES
Overall length: 28
1
/
2
” (72.4cm)
Usable length: 24” (61.0cm)
Overall width: 6
5
/
8
” (16.8cm)
Usable width: 3
1
/
8
” (7.9cm)
Overall height: 24
1
/
8
” (61.3cm)
Weight: 92 lb. (41.8kg)
Capacity: 20,000 lb. (9,090kg)
[Continued from p. 2.]
• DO NOT leave a suspended load unattended.
• DO NOT pull, drag, or slide loads with the lifter. This product must only be used as a lifting device.
Bekijk gratis de handleiding van Vestil SSLP-200-2, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | SSLP-200-2 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1282 MB |
