Vestil SLNM-63-AA handleiding
Handleiding
Je bekijkt pagina 12 van 14
SLNM, Manual
Copyright 2015 Vestil Manufacturing Corp. Page 12 of 14
Step 1
: Tag the MHT, “Out of Service.”
Step 2
: Complete an every use and a monthly inspection. If deformity, corrosion, rusting, or excessive wear of
structural members is present, DO NOT use the MHT. Contact Vestil for instructions.
Step 3
: Remove any dirt or other matter from the forks and other surfaces.
Step 4
: Perform all other necessary adjustments and/or repairs, but DO NOT modify the truck.
The reader should understand the significant difference between necessary adjustments and
repairs, and modifications.
An adjustment is a simple correction that restores the STACKER to normal operating condition, such as tightening
loose fasteners, or removing dirt or other debris from the surface; a repair refers to replacing worn parts with new or
replacement parts.
DO NOT use the stacker if adjustments and/or repairs are incomplete! Return it to service ONLY after finishing
all necessary repairs and adjustments.
A modification is a change that alters the STACKER from normal operating condition, like bending the structural
members or removing a part or several parts. NEVER modify the unit without the express, written approval
of Vestil. Modifications may render the product unsafe to use.
Step 5: Make a dated record of the repairs, adjustments and/or replacements made.
Bekijk gratis de handleiding van Vestil SLNM-63-AA, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | SLNM-63-AA |
| Categorie | Vorkheftruck |
| Taal | Nederlands |
| Grootte | 3423 MB |
