Vestil SBM-80 handleiding
Handleiding
Je bekijkt pagina 3 van 10
Table of Contents Rev. 2/19/2024 SBM MANUAL
Table of Contents Copyright 2017 Vestil Manufacturing Co. Page 3 of 10
NATIONAL STANDARDS
This product is a “Below-the-Hook Lifting Device” (BTH lifter). ASME standard B30.20 (the
“Standard”) applies to BTH lifters. Acquire a copy of the latest version of the Standard before
putting the lifter into service. Follow all use and maintenance/care instructions provided in the
Standard as well as all other provisions for owners and users. If content in this manual conflicts
with any recommendation or mandatory provision in the Standard, apply the provision from
the Standard. Vestil encourages you to immediately contact TECHNICAL SERVICE if you
discover any conflicts.
RECORD OF SATISFACTORY CONDITION
Record the condition of the lifter before putting it into service. Measure the length and
width of the shackle. Record your measurements. Thoroughly photograph the unit from
multiple angles. Include close range photos of all labeling, the lifting shackle, the lifting arm,
fasteners (pins, bolts, nuts, etc.), cable attachment points, and welds. Collate all photographs
and writings into a single file. Mark the file appropriately to identify it. Measure the throat
opening of both hooks. Document the measurements. This record is documentation of the
lifter in satisfactory condition. Compare the results of all inspections to this record to determine
whether the unit is in satisfactory condition. If the lifter is not in satisfactory condition, repair it
before returning it to service. Purely cosmetic changes, like damaged paint/powdercoat, do
not constitute changes from satisfactory condition. However, touchup paint should be applied
to all affected areas as soon as cosmetic damage occurs to prevent rusting and corrosion. If
left unaddressed, rusting/corrosion will alter the lifter from satisfactory condition and could
make it unsafe to use.
LOAD TESTS
After creating a RECORD OF SATISFACTORY CONDITION and before using the lifter for the
first time, a qualified person should conduct a load test. The test load should be 125% of the
rated load of the lifter. The rated load of all SBM-series lifters is 800 pounds (363.6kg), so the test
load should be 1000 pounds (454.5kg). Raise the lifter until it is suspended. Return the lifter to
the ground and unload it. Perform a Monthly Inspection as described in INSPECTIONS AND
MAINTENANCE (below). The lifter must undergo load testing immediately after it is repaired,
modified, or altered.
SPECIFICATIONS
Dimensions, net weight, and capacity information for each spreader beam model is
provided in the “Specifications” sections on pages 3, 4, 5, and 6. Specifications documents for
SBM-series spreader beams are available online to anyone who visits the Vestil website.
Acquire the appropriate specifications document by opening this webpage:
https://www.vestil.com/product.php?FID=571. Scroll down the page and click on the
Download Drawing icon ( ) to access the specifications drawing for your particular model.
Bekijk gratis de handleiding van Vestil SBM-80, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | SBM-80 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2150 MB |
