Vestil S-62-FF handleiding
Handleiding
Je bekijkt pagina 13 van 60
13
Operation
Driving
Pull up the red push button of the E-switch
Tilt the Control handle to driving position, the locking brake is released
If you release Control handle, this returns to the vertical start position, the
truck brakes and the locking brake activates
The truck is steered via the Control handle
Brake:
This stacker is equipped with a magnetic brake that is applied between
10-15 degrees of the vertical position and between 85 -90 degrees of the
lower position in the vertical operating of the handle. The brake can be
operated at any point in the lateral operating of the handle. When you
release your hand from the handle, it will resume neutral position
automatically, and will activate the brake. Always make sure that the brake
is in work before operating the stacker. When parked, always put the
handle in the full vertical position with the brake applied and forks lowered.
Horn:
A horn is located on top of the handle.
Bekijk gratis de handleiding van Vestil S-62-FF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | S-62-FF |
| Categorie | Vorkheftruck |
| Taal | Nederlands |
| Grootte | 38202 MB |
