Vestil S-118-AA-FR handleiding
Handleiding
Je bekijkt pagina 5 van 16
S-118-AA-FR, Manual.doc
Copy
right 2015 Vestil Manufacturing Corp.
Page 5 of 16
EMERGENCY STOP (“E-STOP”) BUTTON:
Press the E-stop button to
immediately interrupt all powered
functions. Use the E-stop during
operation if the travel or fork (raise
and lower) functions do not respond
normally to operator commands.
Use the E-stop as
a service brake to secure the stacker
when
parked.
FIG. 1: Function Controls, Gauges, and Safety Features
BELLY SWITCH:
The belly switch protects the operator from
injury while driving the stacker in reverse. When
pressed, the truck will change direction, i.e. move
forward, for approximately 3 seconds; after 3
seconds it will stop completely. If the belly switch
becomes jammed or stuck, the stacker will move
forward (away from the operator) for at most 3
seconds; the control circuit will remain disabled until
reset.
¾
To reset the circuit, either raise the handle to the
fully vertical position (or simply release the
handle), or press it downwards to the fully
horizontal position.
MOVEMENT CONTROLLERS:
To drive the stacker in
theforwarddirection, rotate
the movement control forward
with your thumbs as indicated
by the solid arrow
superimposed on photograph
below. To
move the pallet
truck in reverse, rotate
the
control wheel in the opposite
direction, which is shown with
a dashed arrow.
The degree of rotation determines the speed of
movement, so the farther you press the wheel
in either direction, the fas
ter the stacker
will
travel,
up
to
a maximum
speed
of
~3mph when
unloaded or ~2.6mph when loaded to
capacity. Simply by releasing the movement
control, the stacker will decelerate to a
com
plete stop.
BATTERY CHARGE GAUGE:
The battery charge gauge
indicates
the
status
of
the
battery.
It
is
located
on
top of the
S3 main body and to the right of
the control yoke. As the
battery
discharges, display lines
disappear from right to left.
Always check the gauge before
using the device; make sure that
the battery is charged before using
the
pallet truck.
Reverse Forward
Horn
RAISE/LOWER, REACH IN/OUT & TILT BACK/FORWARD LEVER:
Handle
Belly Switch
(Emergency Stop)
Movement Controllers
("Butterfly" Switches)
RAISE/LOWER
Forks Reach In/Out
Mast Tilt backward/forward
Key Switch Assembly to turn the unit ON/OFF
Fwd/Rev. operation
will turn on
Emergency Strobe
Bekijk gratis de handleiding van Vestil S-118-AA-FR, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | S-118-AA-FR |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2509 MB |
