Vestil RT-S-62-AF handleiding
Handleiding
Je bekijkt pagina 4 van 18
RT-S-62-AF, Manual
Copyright 2021 Vestil Manufacturing Corp.
Page 4 of 18
REMOVING THE RT -S Stacker FROM THE SHIPPING PALLET:
The truck is shipped in ready-to-use condition. However, it must first be remove
d from the shipping
pallet before it can be used for the first time.
DO NOT attempt to drive the truck off of the pallet; it might tip over and cause bodily injuries or
property damage. To minimize the risk of injury to
yourself or other persons, perform the following steps to
remove the machine from the shipping pallet:
1. Remove all packing material.
2. Inform all personnel not participating in the unpacking process to clear the area.
3.
Lift theRT-S off of the pallet using a hoist or a with a capacity of at least 4,000 pounds. Always apply
the proper hoisting procedures or forklift operation practices you learned during your training program.
Connect the sling to both hook points on the Mas
t (1
on ea
ch side
;
the picture below only sh
ows
the hook
point
on the right side); then lift the unit no more than 6 – 8 inches above the pallet. The RT-S-62-AF will tilt towards the
control yoke. Additionally, it may swing from side-to-side once free of the
pallet if you did not properly position the
hoist above the center of the sling. Stabilize the suspended truck with one hand, and stand safely to the side while
operating the hoist.
To remove the RT-S-62-AF from the shipping pallet using a hoist:
Hook Point
Bekijk gratis de handleiding van Vestil RT-S-62-AF, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | RT-S-62-AF |
| Categorie | Vorkheftruck |
| Taal | Nederlands |
| Grootte | 3187 MB |
