Vestil PNU-2496 handleiding
Handleiding
Je bekijkt pagina 5 van 6
Rev. 6/8/2017 PNU, MANUAL
Copyright 2017 Vestil Manufacturing Corp. Page 5 of 6
Inspections:
Before using the cart for the first time, create a written record that describes the appearance of the cart and how it
operates. Record your observations about how the unit looks and performs while loaded. Include a description of how
do the casters sound as the loaded cart turns. This written record establishes “normal condition”. When conducting
future inspections compare your observations with the written record to determine whether the cart is in normal
condition or requires repairs.
If issues are discovered during an inspection, restore the unit to normal condition before
returning it to service.
Inspect and maintain the unit as described (below) to preserve normal operability. Remove it from service if it is
damaged in any way that affects normal operation. If the unit cannot be restored to normal condition, permanently
remove it from service.
At least once per month inspect the following:
1. Casters and caster receivers: Check the tire pressure. Inflate each tire as necessary. The recommended
pressure appears on the side wall of each tire. Inspect the receivers on the underside of the deck. Verify that
each caster is properly installed in its receiver and that the retaining hardware is securely fastened.
2. Deck: examine the deck for damage including deformation, corrosion, cracked welds, and severe wear. The
deck should be square, rigid, and free of significant rusting. Remove rust with steel wool or a metal bristle
brush, clean the areas to remove rust particles, and apply touchup paint to the affected areas.
3. Handle and handle sockets: Examine the handle and both sockets. Confirm that the socket welds are intact.
Socket openings should not be distorted (e.g. elongated or warped).
4. Labels: confirm that all labels are in good condition and in place as shown in the “Labeling Diagram” (below).
Labeling Diagram:
The unit should be labeled as shown in the diagram. Replace all labels that are missing, damaged, or not easily
readable (e.g. faded).
A
B
A: Label 287 (covered with label 770)
B: Label 658
Bekijk gratis de handleiding van Vestil PNU-2496, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | PNU-2496 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1412 MB |
