Vestil PG-S-045 handleiding
Handleiding
Je bekijkt pagina 11 van 15
Use Instructions:
The operating instructions in this manual are meant to supplement the operating
recommendations of ASME standard B30.20.
Only trained, designated persons should use the Pipe grab. “Designated person” means someone
selected by his or her employer, or by a representative of the employer, as competent to use the pipe
grab. Trainees under the direct supervision of a designated person may use the device. Maintenance
personnel and persons who perform tests also may use the pipe grab when necessary for the
performance of their employment duties. BEFORE you connect the grab to a hoisting device,
perform a proper “Every Lift” inspection as described in the most recent revision of ASME B30.20.
Proceed to step 1 ONLY IF the pipe grab passes the inspection and is deemed safe to use
by
designated inspection personnel.
Step 1: Connect the Pipe Grab to the hoisting device that will be used. The pipe grab must be connected
to the hoist via a safety hook to prevent accidental detachment.
Safety Hook
Properly functioning safety latch
Step 2: Test the pipe grab for normal function. Lift each of the pipe guide weldments to verify that the
grab opens and closes smoothly.
2
1
Step 3: Move the pipe grab into position above the load.
Step 4: Grasp the object. Lift one of the pipe guide weldments to open the grab (photo 5), and while
open, lower the grab around the object (photo 6). Lower the pipe guide weldment until the load-engaging
portions of both arms (identified in FIG. 1) contact the top of the load material (circled in photo 7).
5
6
- 11 -
Bekijk gratis de handleiding van Vestil PG-S-045, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | PG-S-045 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 6783 MB |
