Vestil PDSC-350-62 handleiding
Handleiding
Je bekijkt pagina 22 van 23

6. Fault and troubleshooting
Fault Detection and solution
The climbing machine can't
start or can't go up or down
the stairs
check whether the battery display is
normal. If it shows low power
(<20%), please charge.
If the battery is in power, it will
still be unable to start. Please
contact the supplier.
The battery can't be recharged Please contact the supplier.
Failure of high and low speed
switching control
Check whether the power supply is
connected and normal.
If the power is normal, the switch
can be removed to check whether
the connection is normal. If the
connection is normal, it may be a
high low speed switch. It can be
replaced by yourself. If the problem
remains after the replacement,
please contact your supplier.
Only upstairs, can not
downstairs
Check whether the power supply is
connected and normal.
If the power is normal, it can be
removed from the upper and lower
floors to check whether the
connection is normal, if the
connection is normal, then the
switch fault of the upper and lower
floors can be switched on its own.
If the replacement problem is still
existing, please contact your
supplier.
PDSC-350-62, Manual
Page 22 of 22
Copyright 2020 Vestil Manufacturing Corp.
Bekijk gratis de handleiding van Vestil PDSC-350-62, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
Merk | Vestil |
Model | PDSC-350-62 |
Categorie | Niet gecategoriseerd |
Taal | Nederlands |
Grootte | 5958 MB |