Vestil PAL-16 handleiding
Handleiding
Je bekijkt pagina 3 van 5
Rev. 4/24/2017 PAL, MANUAL
Copyright 2017 Vestil Manufacturing Co. Page 3 of 5
Diagram of Components:
The diagram below pairs names with parts. However, models PAL-12 and PAL-LP have a chain in
place of the shackle. Model PAL-12 does not have link arms.
Inspections and Maintenance:
Regular inspections and maintenance are necessary to keep the device in normal condition. Before
using the puller for the first time, create a written record that describes the appearance of each part. Be
certain that your record includes descriptions about pivot points, pins, bolts, and shackles. This written
record establishes “normal operating condition”. When conducting future inspections, compare those
observations with the written record to determine if a component requires repair or replacement.
Inspect the puller before it is used for the first time. Then, inspect the following at least once per
week.
1. Jaw arms and link arms: examine the arms for twisting, bending and warping regions. Pay
particular attention to wear at pivot points.
2. Pins, bolts, and nuts: check all bolts and shackle pins for straightness. Shackle pins should be
firmly fastened to the shackles.
3. Shackle or chain: inspect for cracks, elongations and deformations.
4. Grippers: confirm soundness of welds to the jaw arms.
5. All components: check for excessive wear.
In addition to inspections, maintain the puller in the following ways:
1. Clean the puller periodically to preserve the paint.
2. Lubricate all pivot points.
Link arm
Jaws
Jaw arm
Shackle
Pivot pin
Shackle
pin
Bekijk gratis de handleiding van Vestil PAL-16, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | PAL-16 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1892 MB |
