Handleiding
Je bekijkt pagina 15 van 19
TABLE OF CONTENTS Rev. 10.5.2022 LAD-RAF, MANUAL
TABLE OF CONTENTS Copyright 2022 Vestil Manufacturing Page 15 of 19
Step 3: Install the plugs, caps, axle and wheels.
a) Install the plastic plugs and square caps in the front legs. First, press the 1in. plastic plug into the
front legs. Then, press the square caps over the plugs and onto the ends of the legs. If necessary,
use a rubber mallet to gently tap the plugs and caps into place.
b) Insert the axle through the axle receiver of the back leg weldment.
c) Then, slide the wheels onto the ends of the axle. Secure the wheels to the axle by inserting a cotter
pin through the pinhole in each end of the axle. Periodically lubricate the axle to allow the wheels
to rotate freely.
Step 4 (LAD-R-26-11 & LAD-R-26-12 only): Install the outriggers.
1in. black
plastic plug
Outrigger
5
/
16
in. - 18
lock nut
5
/
16
in. – 18 x 1in. bolt
Outriggers
installed
Ladder
assembly
Axle
Axle
receiver
Axle
Cotter pin
(bend the ends of
the cotter pins
around the axle)
1in. x 1in.
square cap
Bekijk gratis de handleiding van Vestil LAD-RAF-12-24-G-EZ, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | LAD-RAF-12-24-G-EZ |
| Categorie | Ladder |
| Taal | Nederlands |
| Grootte | 7045 MB |
