Handleiding
Je bekijkt pagina 10 van 13
Table of Contents Rev. 12.6.2018 LAD-MM, MANUAL
Table of Contents Copyright 2017 Vestil Manufacturing Co. Page 10 of 13
Step 3: Install the plugs, caps, and wheels.
a) Install the plastic plugs and square caps in the leg tubes. First, press the 1in. plastic plug into the leg tubes.
Then, press the square caps over the plugs and onto the ends of the legs. If necessary, use a rubber mallet to
gently tap the plugs and caps into place.
b) Press a plug into each end of the cross brace.
c) Then, insert the wheels into the wheel brackets and install
3
/
8
”-16 x 2
1
/
2
” bolts (11113). Secure the bolts with
axle. Periodically lubricate the bolts to allow the wheels to rotate freely.
Step 4 (LAD-MM-11 & LAD-MM-12 only): Install the outriggers. Unfasten the bolt (11055), flat washer (33006),
and lock nut (37021). Then, reinstall the hardware the outrigger, support bracket, and base support as shown.
1in. black
plastic plug
44-514-311
Left outrigger
33006
Ladder
assembly
1in. x 1in.
square cap
37024
11113
16-132-009
Insert
plug
Cross
brace
11055
44-514-310
Right outrigger
37021
Support
bracket
Base
support
Bekijk gratis de handleiding van Vestil LAD-MM-12-G, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | LAD-MM-12-G |
| Categorie | Ladder |
| Taal | Nederlands |
| Grootte | 3732 MB |
