Vestil LAD-16-21-P handleiding
Handleiding
Je bekijkt pagina 16 van 18
Table of Contents Rev. 12/2/2019 LAD (13-16 STEPS), MANUAL
Table of Contents Copyright 2019 Vestil Manufacturing Co. Page 16 of 18
[Continued from p. 15]
platform bar and, if applicable, the chain and snap hooks. Confirm that the bar and chain are undamaged and
securely fastened to the guard railing. Snap hooks should close automatically.
• Rear wheels (16-132-310): Check the wheels. They must not be significantly worn, i.e. must still have ~1/8” of
tread. Wheels must not be cracked, warped, broken, etc. They should be vertical (not bent towards, or away from,
the ladder) and roll smoothly. Examine the wheel axle and cotter pins (11053) for damage.
• Frame members (step weldment, back leg weldment, base supports), handrails, and all fasteners (bolts, nuts,
pins): Inspect each frame member for damage. In particular, look for excessive wear, bends, cracks, warps,
damaged welds, and looseness. All frame pieces should be square, rigid, and free of rust and corrosion. Remove
rust and apply touch-up paint to the affected area. Check the areas where components are fastened/bolted
together. Check for cracks around bolt holes, elongated bolt holes, etc.
• Square caps (99-024-027): Check the caps for cracks, tears, and wear. If either cap is not in satisfactory condition,
install a replacement cap before returning the ladder to service. Even a moderate amount of wear can affect the
performance of a cap.
• Outriggers and outrigger fasteners (bolts, nuts): Examine the outriggers (44-514-310 & 44-514-311). Both should
be undamaged and be securely fastened to the step weldment. Both outriggers should make solid contact with the
ground. The ladder should not wobble. Confirm that the caps on the outrigger legs are in satisfactory condition.
Maintenance: Regular maintenance is required for the ladder to function properly for as long as possible. in
addition to correcting issues discovered during inspections, maintain the ladder in the following ways.
• Clean the ladder with a damp cloth to remove dirt and grime, especially from step surfaces. Let the ladder dry
completely before returning it to service.
• Lubricate bolts as necessary for the rear wheels to rotate freely. DO NOT get lubricant on the bolt threads!
• Apply touchup paint wherever the finish is damaged. Apply touchup paint as soon as damage occurs.
Bekijk gratis de handleiding van Vestil LAD-16-21-P, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | LAD-16-21-P |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 7955 MB |
