Vestil KT-S-16-200-BK handleiding
Handleiding
Je bekijkt pagina 4 van 5
Table of Contents Rev. 4/5/2021 KT-S-16-200-BK, MANUAL
Table of Contents Copyright 2021 Vestil Manufacturing Corp. Page 4 of 5
RECORD OF SATISFACTORY CONDITION (THE “RECORD”)
After the unit is assembled, make a detailed record of its condition. Include observations about all
features: frame elements, fasteners (bolts, nuts, washers), and casters. Thoroughly photograph the unit
from multiple angles so that all features are clearly imaged. Photograph all labels applied to the
product. Describe where each label is located. Collect all photographs and writings into a single file.
This file is a record of the product in satisfactory condition. Compare the results of each inspection to
this RECORD to determine if the unit is in satisfactory condition. Do not use the product unless it is in
satisfactory condition
INSPECTIONS AND MAINTENANCE
Compare inspection results to the RECORD. Do not continue to use the product unless every
component is in SATISFACTORY CONDITION. Cosmetic changes, like damaged paint/powder coat
do not constitute changes from satisfactory condition. However, touchup paint should be applied to all
affected areas as soon as damage occurs. Contact TECHNICAL SERVICE to order replacement
parts. Contact information is provided on the cover page of this manual.
Inspect the following at least once per month:
1. Surfaces – Check all surfaces of the product for dirt or other matter, especially fluids. Clean the
surfaces. Examine the whole structure for rusting or metal erosion, rot, thinned regions. In
particular, examine the areas around bolt holes and washers for rusting and corrosion. If rusting is
purely superficial, remove it. Clean the affected area and apply touchup paint. If rusting, rot, or
thinning has weakened the material, contact TECHNICAL SERVICE for advice.
2. Fasteners – Examine hardware & fasteners (bolts, nuts, & washers). Replace damaged/worn
hardware. One a lock nut is removed, it must be replaced with a new lock nut.
3. Casters – Inspect each caster. Tighten mounting fasteners. Each wheel should turn freely. Check
the wheels for cracks, significant wear, and other forms of damage. The skate should not wobble or
lean as it rolls.
4. Labels – Replace missing and/or damaged labels. All labels should be easily readable from a
reasonable distance.
LABELING DIAGRAM
Label content and locations are subject to change so your product might not be labeled exactly as
shown. Compare this diagram to the RECORD. If differences exist between the diagram and the
RECORD, contact TECHNICAL SERVICE
. Replace all labels that are damaged, missing, or not easily
readable (e.g. faded). To order replacement labels, contact the technical service and parts department
online at
http://www.vestilmfg.com/parts_info.htm and/or by calling (260) 665-7586 and asking the
operator to connect you to the Technical Service and Parts Department.
1153, apply underneath
Bekijk gratis de handleiding van Vestil KT-S-16-200-BK, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | KT-S-16-200-BK |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1435 MB |
