Handleiding
Je bekijkt pagina 22 van 51
Rev. 0213 EPT, Manual.doc
Copyright 2013 Vestil Manufacturing Corp. Page 22 of 51
Plug the charger’s AC cord into an 115VAC power source:
x EPT-30’s
: to access the cord, remove the top tray.
x EPT-45’s
: the AC cord is tucked inside the battery box on the right side (circled in the second photo
below)
Plug this end into a standard 115 volt outlet and charge batteries for at least 8 hours. The charger will not
overcharge the batteries, so leaving the unit plugged in overnight or over a weekend is ok. However, the charger
should only be used indoors! When the charge cycle completes, disconnect the AC cord from the outlet, and
reinstall the tray (EPT-30’s).
Storing the EPT
: Unload the lifter; then return it to the designated storage location.
AC charger
cord
A proper storage location is one where the unused lifter will not:
1. Interfere with or obstruct traffic or other operations;
2. Be exposed to corrosive chemicals or water, either as a consequence of weather or of worksite
conditions.
Bekijk gratis de handleiding van Vestil JMD-1000, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | JMD-1000 |
| Categorie | Ladder |
| Taal | Nederlands |
| Grootte | 39822 MB |
