Vestil JIB-FM-20 handleiding
Handleiding
Je bekijkt pagina 9 van 12
TABLE OF CONTENTS Rev. 2/22/2024 JIB-FM, MANUAL
TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Co. Page 9 of 12
Proper load lifting
Always follow the instructions provided with your hoist and trolley.
Position the trolley and hoist directly above the load. Proper positioning is diagrammed below.
Proper load centering beneath hoist and trolley
Improperly positioned loads
Connect the load to the hoist chain/cable, using appropriate rigging. Then, raise the load only as high as
necessary. To rotate the boom, slowly direct the load to the desired location. Once the boom and hoist are
properly centered above the work location, lower the load and disconnect it from the hoist.
RECORD OF SATISFACTORY CONDITION (THE “RECORD”)
Thoroughly inspect the crane after assembling it and before putting it into service. Record the condition and
appearance of each of the frame members (boom, mast, and mast socket), the rollers, and all fasteners (bolts,
nuts, etc.). Thoroughly photograph the crane from multiple angles. Include close range photographs of the
rollers, all labeling, and all boom connections/fasteners. Also photograph the foundation, paying particular
attention to the area immediately surrounding the base of the mast. Add the photographs to the record. Collect
all photographs and writings in a single file. This file is a record of the crane in satisfactory condition. Compare the
results of all INSPECTIONS to this RECORD to determine whether the crane is in satisfactory condition. Do not use
the crane unless it is in satisfactory condition. Purely cosmetic changes, like damaged paint or powdercoat, are
not changes from satisfactory condition. However, touchup paint should be applied as soon as damage occurs.
NATIONAL STANDARDS
This product is a floor mounted jib crane. ASME standard B30.17 (the “Standard”) applies to jib cranes. You
should acquire a copy of the latest version of the standard. Follow all use and maintenance/care instructions
provided in the Standard as well as all other provisions for jib crane owners and users. If any content in this manual
is inconsistent with a recommendation or mandatory provision in the Standard, apply the provision from the
Standard. Vestil encourages you to immediately contact TECHNICAL SERVICE to report inconsistencies.
Front view
Side view
Front view
Hoist cable/chain
aligned with
centerline (red
dashed line)
Hoist cable/chain
not aligned with
centerline (red
dashed line)
Side view
Bekijk gratis de handleiding van Vestil JIB-FM-20, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | JIB-FM-20 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2710 MB |
