Vestil HYD-10-DC-SS handleiding
Handleiding
Je bekijkt pagina 5 van 14
5
2.2 Loading Capacity Chart (Kg)
3. NOMENCLATURE OF EACH SECTION
1 —— Front Wheel 6 —— Chain Wheel
2 —— Chassis 7 —— Handle Rack
3 —— Fork Assembly (Drawer) 8 —— Electric Control Box
4 —— Optional Platform 9 —— Charger Socket
5 —— Pump Assembly 10 —— Steering Wheel
4. SAFETY INSTRUCTION
4.1 Use it on a level paved surface.
4.2 Don’t load over the maximum capacity and ensure the balance of
loading.
4.3 To cooling the temperature of power pack motor, it should be paused
working for minutes after continuous working with load. Otherwise, it
might cause damage to power pack.
4.4 Recharge the battery when it has no enough power. Ensure local
electric power matches the charge. Do not discharge the battery
completely.
4.5 Don’t touch the chain or any other moving parts.
4.6 Please close the electric control box before use.
5. INSPECTION BEFORE USE
HYD-10-DC series Stacker is integral packing, it was adjusted. The owner
should inspect the stacker before use as follows:
5.1 Ensure all parts complete and in good condition. Do not use the
stacker and contact local supplier in case of any parts missing or
defective.
5.2 Check electric control box.
5.3 Ensure oil is full and no oil leakage in the hydraulic system.
5.4 Ensure battery has enough power. The battery has been charged
before shipment.
But due to long time delivery, it would be low in power. When turn on
the stacker, the
Voltage meter shows 10.5V, or when lifting loaded, the coulometer
Bekijk gratis de handleiding van Vestil HYD-10-DC-SS, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | HYD-10-DC-SS |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1429 MB |
