Vestil HRAIL-9072 handleiding
Handleiding
Je bekijkt pagina 3 van 4
Rev. 9/28/2017 HRAIL-9072, MANUAL
Copyright 2017 Vestil Manufacturing Corp. Page 3 of 4
Assembly & Use:
Assemble the barrier in the desired location by sliding one side of the panel frame over a base peg. Repeat the
process with another base on the other side of the panel to complete the assembly.
Multiple barriers can be connected by installing barriers over the free pegs of the bases and over a peg of another
base. When multiple barriers are used, adjacent barriers should be stabilized with HRAIL-CON connectors Install
connectors at the sites circled in the diagram below. Apply one side of the connector. The cups at each end of the
connector should fit around the frame of the 2 panels. Then, apply the other side of the connector. Insert the carriage
bolt through the bolt hole and tighten the nut on the bolt.
NOTE: Unit shown in this diagram
has been darkened to improve
contrast and visibility. Actual
product finish is significantly lighter.
Install end of
adjacent unit
over free peg
Install
end of
adjacent
unit over
f
ree peg
Panel
Pegs
HRAIL-CON:
Carriage
bolt & nut
Connector (2 pieces).
Pieces fasten together
with carriage bolt & nut)
Connector cups
create a channel
for panel frame
Base
Bolt hole
Bekijk gratis de handleiding van Vestil HRAIL-9072, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | HRAIL-9072 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 1152 MB |
