Vestil HOP-LP-N handleiding
Handleiding
Je bekijkt pagina 9 van 10
Table of Contents Rev. 3/17/2022 HOP-LP-N, MANUAL
Table of Contents Copyright 2021 Vestil Manufacturing Co. Page 9 of 10
Step 1: Tag the hopper, “Out of Service.”
Step 2: Remove dirt and debris from all surfaces.
Step 3: Conduct the scheduled inspection. If deformity, corrosion, rusting, or excessive wear of the frame or
chute is discovered, remove it from service.
Step 4: Perform all necessary adjustments, replacements and/or repairs, but DO NOT modify the hopper.
Step 5: Make a dated record of any repairs, adjustments, and/or replacements.
LABELING DIAGRAM
The unit should be labeled as shown in the diagram. However, label content and location are subject to
change so your product might not be labeled exactly as shown. Thoroughly photograph the unit when you
first receive it as discussed in the RECORD OF SATISFACTORY CONDITION
section on p. 8. Make sure that
your record includes a photograph of each label. Replace all labels that are, or later become, damaged,
missing, or not easily readable (e.g. faded). To order replacement labels, contact the
TECHNICAL SERVICE
AND PARTS DEPARTMENT online at http://www.vestilmfg.com/parts_info.htm. Alternatively, you may call
(260) 665-7586 and ask the operator to connect you to the PARTS DEPARTMENT.
A
D
C
B
A: Label 375 (both sides)
C: Label 220 (both sides)
E: Label 620 F: Label 549 (on back)
B: Label 208 (both sides & back)
D: Label 995
G: Label 419
E
B
G
F
Bekijk gratis de handleiding van Vestil HOP-LP-N, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | HOP-LP-N |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2667 MB |
