Vestil HIPM-2748-DC handleiding
Handleiding
Je bekijkt pagina 2 van 18
Table of Contents Rev. 5/11/2020 HIPM, MANUAL
Table of Contents Copyright 2020 Vestil Manufacturing Corp. Page 2 of 18
SIGNAL WORDS
This manual uses SIGNAL WORDS to draw attention to uses of the product that could result in personal
injuries, as well as the probable seriousness of those injuries. Other signal words call attention to uses likely to
cause property damage. Signal words used in this manual appear below along with the definition of each word.
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or SERIOUS
INJURY. Use of this signal word is limited to the most extreme situations.
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or SERIOUS
INJURY.
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or MODERATE
injury.
Identifies practices likely to result in product/property damage, such as operation that might
damage the product or other property.
SAFETY INSTRUCTIONS
Study the entire manual before using this crane. Read the manual to refresh your understanding of the safe
operation, inspection or maintenance procedures whenever necessary.
Improper or careless operation might result in serious personal injuries.
• DO NOT use this truck if it is damaged or malfunctioning! Restore it to normal operating condition before returning it
to service.
• DO NOT exceed the capacity of your unit. See SPECIFICATIONS (above). Center and evenly distribute all loads
applied to the forks. Loads must rest firmly against the upright frame.
• ONLY raise the forks a few inches to transport loads.
• DO NOT reach into the scissor leg mechanism, especially while a load is applied to the forks. Keep clothing away
from pivot points during operation.
• ONLY use this lifter on even, level surfaces. DO NOT move loads up or down inclines with this truck.
• This product is a material handling truck. DO NOT use it to lift or carry people.
• DO NOT use the truck if any label is unreadable, damaged, or missing. See LABELING DIAGRAM on p. 17.
Contact Vestil for replacement labels.
• DO NOT modify the crane! Modifications automatically void the LIMITED WARRANTY (p. 18) and might make the
lifter unsafe to use.
SPECIFICATIONS
Dimensions, capacities, and net weights appear in the table and diagrams below.
Model
A
B
C
D
E
F
G
Capacity
Net wt.
HIPM-2772-DC
11”
27”
91
11
/
32
”
72”
N/A
41
5
/
8
”
66
1
/
2
”
2,500 lb.
828 lb.
HIPM-2772-AC
11”
27”
91
11
/
32
”
72”
N/A
41
5
/
8
”
66
1
/
2
”
2,500 lb.
828 lb.
HIPM-2772-AIR 11” 27” 91
11
/
32
” 72”
N/A 41
5
/
8
” 66
1
/
2
” 2,500 lb. 828 lb.
HIPM-2748-DC 13
3
/
4
” 27” 69
7
/
16
” 51” 48” 41
1
/
2
” 65
15
/
16
” 2,500 lb. 530 lb.
HIPM-2748-AC
13
3
/
4
”
27”
69
7
/
16
”
51”
48”
41
1
/
2
”
65
15
/
16
”
2,500 lb.
530 lb.
HIPM-2748-AIR
13
3
/
4
”
27”
69
7
/
16
”
51”
48”
41
1
/
2
”
65
15
/
16
”
2,500 lb.
530 lb.
HIPM-2048-DC
6
3
/
4
”
20”
69
7
/
16
”
51”
48”
41
1
/
2
”
66”
2,500 lb.
514 lb.
HIPM-2048-AC
6
3
/
4
”
20”
69
7
/
16
”
51”
48”
41
1
/
2
”
66”
2,500 lb.
514 lb.
HIPM-2048-AIR
6
3
/
4
”
20”
69
7
/
16
”
51”
48”
41
1
/
2
”
66”
2,500 lb.
514 lb.
Bekijk gratis de handleiding van Vestil HIPM-2748-DC, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | HIPM-2748-DC |
| Categorie | Vorkheftruck |
| Taal | Nederlands |
| Grootte | 4943 MB |
