Vestil GR-H2R-DI-8-YL handleiding
Handleiding
Je bekijkt pagina 3 van 10
TABLE OF CONTENTS 5/14/2025 GR-H2R-DI, MANUAL
TABLE OF CONTENTS Copyright 2025 Vestil Manufacturing 3 of 10
SIGNAL WORDS
SIGNAL WORDS appear in this manual to draw the reader’s attention to important safety-related
messages. The following are signal words used in this manual and their definitions.
SAFETY INSTRUCTIONS
Vestil strives to identify foreseeable hazards associated with the use of its products but cannot
anticipate every possible situation that might arise. Therefore, the end-user is responsible for safe
installation, inspection, and maintenance practices.
Risks of serious personal injuries or death.
Read & understand this manual before installing, inspecting, or servicing the guardrail system.
Ensure the supporting surface (e.g., concrete or asphalt) is capable of supporting the guardrail
system and the forces it may encounter.
Use only appropriate anchor kits for the supporting surface. Incorrect anchoring may result in system
failure.
Securely fasten each guardrail section to the posts using the provided hardware.
Inspect the guardrail regularly for signs of damage, wear, or loose components.
Do not modify the guardrail without manufacturer approval. Unapproved modifications
automatically void the LIMITED WARRANTY on p. 10 and might make the system unsafe.
Keep the area around the guardrail clear of obstructions.
Do not use the guardrail as a support for heavy equipment or materials.
Do not climb on or hang from the guardrail.
Establish procedures for severe impacts or guardrail failure, including area evacuation.
Train employees on the purpose of the guardrail and how to report damage.
Use appropriate signage to indicate areas protected by guardrails or to warn of potential hazards.
In locations accessible to children, install additional barriers or signage to discourage climbing or
tampering.
Inspect the guardrail for damage after any vehicle impact and ensure it remains functional.
Replace any component immediately after it sustains impact damage.
Repair or replace components that are not in SATISFACTORY CONDITION as soon as the change in
condition is detected. See RECORD OF SATISFACTORY CONDITION on p. 7.
Do not install the guardrail in areas with extreme weather conditions (e.g., high winds, flooding,
seismic activity) or corrosive environments (e.g., chemical exposure, high humidity) unless the system is
specifically rated for such conditions.
Ensure the guardrail is installed at a safe distance from electrical equipment to prevent shock risks.
Consult local regulations for clearance requirements.
Position the guardrail to avoid obstructing emergency exits or evacuation routes.
Confirm that the guardrail base does not protrude in a way that creates a tripping risk for
pedestrians.
DANGER
Identifies a hazardous situation which, if not avoided, WILL result in DEATH or
SERIOUS INJURY. Use of this signal word is limited to the most extreme
situations.
WARNING
Identifies a hazardous situation which, if not avoided, COULD result in DEATH or
SERIOUS INJURY.
CAUTION
Indicates a hazardous situation which, if not avoided, COULD result in MINOR or
MODERATE injury.
NOTICE
Identifies practices likely to result in product/property damage, such as
operation that might damage the product.
!
!
!
Bekijk gratis de handleiding van Vestil GR-H2R-DI-8-YL, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | GR-H2R-DI-8-YL |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 2709 MB |
