Vestil FM-2072 handleiding
Handleiding
Je bekijkt pagina 14 van 20
Table of Contents 2/2/21 FM, MANUAL.DOCX
Table of Contents Copyright 2020, Vestil Manufacturing Corp. Page 14 of 20
STEP 33. Insert the handle into the socket in the leveler plate. Pull the handle away from the door and push
down to lift the leveler plate to a vertical position. Have a second person position a lift truck so that the forks
support the lip plate and hold the leveler plate in the vertical position.
DO NOT work directly under lift truck forks.
STEP 34. Have one person place a 1-1/2” wrench on the spring winding tube flats. This person will tighten the
spring and maintain tension on the spring through the tightening process. Be sure to maintain a good grip on
the wrench as to not lose spring tension.
DO NOT use an adjustable wrench for this process.
STEP 35. Have the second person use a ¾” wrench to loosen the two bolts on the spring winding tube. The
first person will then pull his wrench a quarter-turn in the indicated direction to add tension. Re-tighten the two
bolts on the flats of the interior bar.
NOTE: for increased leverage, a third person can use a 1” schedule 40 pipe over the knob on the winding tube
to apply tension.
STEP 36. Test the tension. If the lip plate does not completely rise, more tension is needed. If the lip plate
bounces or floats when the lip is extended, there is too much lifting tension. Repeat Steps 34 and 35 until the
proper spring tension is achieved.
Bekijk gratis de handleiding van Vestil FM-2072, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | FM-2072 |
| Categorie | Niet gecategoriseerd |
| Taal | Nederlands |
| Grootte | 4509 MB |
