Vestil EPT-2547-30 handleiding
Handleiding
Je bekijkt pagina 29 van 58
TABLE OF CONTENTS 5/19/2022 EPT MANUAL
TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Page 29 of 58
Step 2: Lift both sides of the battery, so that the battery remains level. To facilitate level lifting, attach tie wraps or
other NONMETALLIC material (for example, two short lengths of nylon rope) to the terminals; then lift both sides
simultaneously (see Photo 3). The cylinder hose will be visible through the opening in the base of the battery box
after the batteries are removed. See Photo 4.
DO NOT create a path between the terminals by connecting the tie wraps (or sections of nylon rope).
Step 3: Disconnect the cylinder from the lower retaining bracket: 1) Disconnect the hose from the bottom of the
cylinder with a 16mm wrench (see Photo 5); 2) To prevent leakage from the hose, pull the free end of the hose into
the battery box (shown in Photo 7); 3) Remove the snap ring from the pin (see Photo 6); 4) Pull the pin out of the
bracket and cylinder.
Step 4: Disconnect the cylinder from the upper retaining bracket: 1) Remove the snap ring from the pin that extends
through the piston rod (photo 8); then 2) Remove the pin (see Photo 9) and collect the bushings.
3
4
Cylinder
Hose
6
7
5
Disconnect hydraulic hose
from cylinder with 16mm
(or adjustable) wrench
Snap ring (another snap
ring is fastened to the
other end of the pin)
Retaining pin
Lower retaining
bracket
Remove Snap
Ring
If the pin requires encouragement to move, use a
flat punch and hammer.
8
9
Bushings
Upper
retaining
bracket
Bekijk gratis de handleiding van Vestil EPT-2547-30, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | EPT-2547-30 |
| Categorie | Vorkheftruck |
| Taal | Nederlands |
| Grootte | 48560 MB |
