Vestil EPT-2048-45-RP-AGM handleiding
Handleiding
Je bekijkt pagina 22 van 58
TABLE OF CONTENTS 5/19/2022 EPT MANUAL
TABLE OF CONTENTS Copyright 2021 Vestil Manufacturing Page 22 of 58
Plug the charger’s AC cord into an 115VAC power source:
• EPT-30’s: to access the cord, remove the top tray.
• EPT-45’s: the AC cord is tucked inside the battery box on the right side (circled in the second photo
below)
Plug this end into a standard 115 volt outlet and charge batteries for at least 8 hours. The charger will not
overcharge the batteries, so leaving the unit plugged in overnight or over a weekend is ok. However, the charger
should only be used indoors! When the charge cycle completes, disconnect the AC cord from the outlet, and
reinstall the tray (EPT-30’s).
STORING THE EPT
Unload the lifter; then return it to the designated storage location.
AC charger
cord
A proper storage location is one where the unused lifter will not:
1. Interfere with or obstruct traffic or other operations;
2. Be exposed to corrosive chemicals or water, either as a consequence of weather or of worksite
conditions.
Bekijk gratis de handleiding van Vestil EPT-2048-45-RP-AGM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | EPT-2048-45-RP-AGM |
| Categorie | Vorkheftruck |
| Taal | Nederlands |
| Grootte | 48560 MB |
