Vestil EPT-2048-45-AGM handleiding
Handleiding
Je bekijkt pagina 22 van 51
Rev. 0213 EPT, Manual.doc
Copyright 2013 Vestil Manufacturing Corp. Page 22 of 51
Plug the charger’s AC cord into an 115VAC power source:
x EPT-30’s
: to access the cord, remove the top tray.
x EPT-45’s
: the AC cord is tucked inside the battery box on the right side (circled in the second photo
below)
Plug this end into a standard 115 volt outlet and charge batteries for at least 8 hours. The charger will not
overcharge the batteries, so leaving the unit plugged in overnight or over a weekend is ok. However, the charger
should only be used indoors! When the charge cycle completes, disconnect the AC cord from the outlet, and
reinstall the tray (EPT-30’s).
Storing the EPT
: Unload the lifter; then return it to the designated storage location.
AC charger
cord
A proper storage location is one where the unused lifter will not:
1. Interfere with or obstruct traffic or other operations;
2. Be exposed to corrosive chemicals or water, either as a consequence of weather or of worksite
conditions.
Bekijk gratis de handleiding van Vestil EPT-2048-45-AGM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | EPT-2048-45-AGM |
| Categorie | Vorkheftruck |
| Taal | Nederlands |
| Grootte | 39822 MB |
