Vestil EPT-2047-30-AGM handleiding
Handleiding
Je bekijkt pagina 39 van 51
Rev. 0213 EPT, Manual.doc
Copyright 2013 Vestil Manufacturing Corp. Page 39 of 51
Step 9: Install a new controller by reversing steps 1 through 8.
Step 6: After you have unfastened all 4 of the cable connections (first photograph below); then remove the three
8mm screws (1 screw in back and 2 in the front) holding the motor controller to the back plate with a Philips
screwdriver, and 8mm wrench.
Step 7: Remove the motor controller.
Step 8: Verify that each of the 4 spade terminal
connections on the forward / reverse motor
contactor is sound.
Bekijk gratis de handleiding van Vestil EPT-2047-30-AGM, stel vragen en lees de antwoorden op veelvoorkomende problemen, of gebruik onze assistent om sneller informatie in de handleiding te vinden of uitleg te krijgen over specifieke functies.
Productinformatie
| Merk | Vestil |
| Model | EPT-2047-30-AGM |
| Categorie | Vorkheftruck |
| Taal | Nederlands |
| Grootte | 39822 MB |
